Motor Parts
|
||
|
|
|
|
|
CM-001 |
C-Can TWP C-Can, produced from 0.4mm (.0157") hard metal, nickel plated, this Can is bend on precise hand tooling, can is hand made so it provides a perfect accuracy, it weights only 3.1grammes |
![]() |
| CM-001M | C-Can
- (Micro) This is a shortened version of a TWP C-Can, the lenght is 20.8mm (0.819") produced from 0.4mm (.0157") hard metal, nickel plated, this Can is bend on precise hand tooling, can is hand made so it provides a perfect accuracy, it weights only 2.5 grammes |
|
|
CM-002 New* |
C-Can 2005/2006 NEW TWP C-Can, produced from 0.4mm (.0157") hard metal, nickel plated, this Can is bend on precise hand tooling, can is hand made so it provides a perfect accuracy, this can have a better magnetic field, and it weights only 3.2 grams
|
|
|
CM-003
|
D-Can TWP D-can, produced from 0.4mm (.0157") hard metal, nickel plated, this Can is bend on precise hand tooling, can is hand made so it provides a perfect accuracy, it weights only 3.1grams
|
|
|
CN-002 New* |
C-Can Endbell NEW TWP plastic endbell for C-cans, this new design provides absolute resistance against vibration and impacts, precise fit when assembling with a C-can, weights 1 gram |
|
|
CN-003 New* |
D-Can Endbell NEW TWP plastic endbell for D-cans, this new design provides absolute resistance against vibration and impacts, precise fit when assembling with a D-can, weights 1.2 grams |
|
|
CN-004 New* |
C-Can complete Endbell NEW TWP completely assembled endbell for C-cans, including oilite bearing, and new hardware, weights only 2.7 grams |
![]() |
|
CN-005 New* |
D-Can complete Endbell NEW TWP completely assembled endbell for C-cans, including oilite bearing, and new hardware, weights only 2.9 grams |
|
|
CC-003 |
Brush Hoods Made from tough brass plate with thickness of 0.4mm (.0157"), hand work, ventilated hoods.
|
|
|
CC-004 New* |
Brush Hoods 2005/2006 NEW TWP brush hoods made from tough brass plate with thickness of 0.4mm (.0157"), the brush clearance is the smallest possible in these new hardware. |
![]() |
|
CAP-001 New* |
Cap Phenolic cap, for S16D Chinese type arms |
|
|
DI-004 |
Heat Sink
|
|
|
PM-005 |
Aluminum Spring Cups diameter for springs is 3.55mm (.180") |
|
|
PA-006 |
Screws 4 /bag |
|
|
PI-007 |
Tapping Screws 4/ bag |
|
|
DT – 008 |
Tapping Screws (Bulk) 100/bag |
|
|
MAGNETS |
||
|
IF-010D |
Power I for D - Can and C-Can Super strong, this mag is angle tip, improves RPM
|
|
|
|
|
|
|
IF-012 |
Power II Magnets .450 long This magnets have got the same profile as MEGA III (very low cog) |
![]() |
|
IC – 001 |
Cobalt Mag .400” x .400” / .400 x 440 |
|
|
COL-001 |
Epoxy (RED) Single component, high temperature epoxy magnet adhesive. Oven cure. |
|
|
COL-002 |
Epoxy Double component, epoxy magnet adhesive.
|
|
|
Springs |
||
|
3N-016 |
Standard Inox steel |
|
|
3R-017 |
Reverse
|
|
|
TF - 001 |
Blue Spring Insulator
|
|
|
ESB-018 |
Armature Spacers Phosphor Bronze or Steel 0,15 / 0,30 / 0,50 mm 10/bag |
|
|
|
Armature Spacers (Bulk) 100 /bag |
|
|
Set Ups
|
||
|
KMB-010 |
SET UP BOX STOCK G 12 / G20 Ready to run |
![]() |
|
KMB- 011
|
SET UP MICRO G 12 / G 20 Ready to run |
![]() |
|
KMB-012 New* |
SET UP BOX STOCK G 12 / G20 (2005/2006) Ready to run |
![]() |
|
KMP-016 New* |
SET UP 16DReady to run 2005 AMSRA Nat's Champion |
![]() |
|
Axle and Motor Bearings |
||
|
5 MM AB |
5 mm can and endbell ball bearing |
|
|
5 MM FB |
5 mm flanged and shielded can ball bearing |
|
|
6 MM FB |
6 mm flanged and shielded ball bearing |
|
|
3332 FB |
3/32 flanged axle ball bearing |
|
|
3332 EX |
3/32 premium axle ball bearing, open construction |
|
Complete Motors |
||
|
TWP P16D |
Complete with KMP-016 and #502 armature |
|
|
TWP Z |
TWP SUPER WASP |
|
|
TWP 12 |
TWP 12 |
|
|
TWP 20 |
TWP 20 |
|
|
MAB-01 |
MOTOR MABUCHI 16D Rental |
|
|
MAB-02 |
MOTOR MABUCHI FLY/NINCO Little Ripper / Sakatsu /JK / S7 |
|
|
#499 UPAF competition |
Super 16D Motor PARMA #499, cap, alum spring post, 6MM TWP oilite, big foot or goldust brushes |
|
|
TWP PS16D |
KMP-016 WITH PROSLOT S16D ARMATURE |
|
|
Reconditioning
|
||
|
MO-001 |
Full arm reconditioning includes removing rust from shafts and blanks, ultrasonic cleaning to remove carbon, diamond truing the commutator, precision balancing and dye. Balancing is done using HEINS BALANCING MACHINE-USA
|
|
|
|
|
|
|
MO-002 |
Ceramic Zapping Ferrite Magnets |
|
|
|
|
|
|
Rubbers & Tires Speed/UFRA
Rubber: Made in Brazil, under development by 3 years, used to set records
all over the world on both scale and wing car racing. Available in medium
(20-24) and hard (30-34) hardness. This is the choice of the pro's. Wonder
Rubber: Made in USA, the traditional compound for wing car racing. Available
in (30-34) hardness. Dimensions: 965" dia (24.51mm), ID .290"
dia (7.38mm). Fish
Rubber: Made in USA, the traditional compound for scale car racing.
Available in (10-14) hardness. Dimensions: 1.160" dia (29.47mm),
ID .370" (9.40mm).
|
||
| PINT- 002SU | Speed/UFRA
rubber - 1/32 INTERNATIONAL tires. hub length (16.51mm) .651", (12.22mm) .480" dia - 3/32" x .790" or .770" - Medium or Hard |
|
| PINT-002F | Fish
rubber - 1/32 INTERNATIONAL tires. hub length (16.51mm) .651", (12.22mm) .480" dia - 3/32" x .790" or .770" |
|
| PA-013-3/32SU | Speed/UFRA rubber - Standard hub - length (20.57mm) .810" - (12,5mm) .474" dia. - 3/32" x 790" or .770" - Medium or Hard | |
| PA-013-3/32SUD | Speed/UFRA rubber - Drilled hub - length (20.31mm) .800" - (11,94mm) .470" dia. - 3/32" x 790" or .770" - Medium or Hard | |
| PA-013-3/32SUFH | Speed/UFRA rubber - Full hub - length (20.67mm) .814" - (12,00mm) .472" dia. - 3/32" x 790" or .770" - Medium or Hard | |
| PA-013-3/32SUM | Speed/UFRA rubber - Mini Full hub - length (20.57mm) .810" - (6,73mm) .265" dia. - 3/32" x 790" or .770" - Medium or Hard | |
| PA-013-3/32W | Wonder rubber - Standard hub - length (20.57mm) .810" - (12,5mm) .474" dia. - 3/32" x 790" or .770" | |
| PA-013-3/32WD | Wonder rubber - Drilled hub - length (20.31mm) .800" - (11,94mm) .470" dia. - 3/32" x 790" or .770" | |
| PA-013-3/32WFH | Wonder rubber - Full hub - length (20.67mm) .814" - (12,00mm) .472" dia. - 3/32" x 790" or .770" | |
| PA-013-3/32F | Fish rubber - Standard hub - length (20.57mm) .810" - (12,5mm) .474" dia. - 3/32" x 790" or .770" | |
| PA-013-3/32FFH | Fish rubber - Full hub - length (20.67mm) .814" - (12,00mm) .472" dia. - 3/32" x 790" or .770" | |
| PA-013-3/32FM | Fish rubber - Mini Full hub - length (20.57mm) .810" - (6,73mm) .265" dia. - 3/32" x 790" or .770" | |
| PA-013-1/8SU | Speed/UFRA rubber - Standard hub - length (20.57mm) .810" - (12,5mm) .474" dia. - 1/8" x 13/16" or .790" - Medium or Hard | |
| PA-013-1/8F | Fish rubber - Standard hub - length (20.57mm) .810" - (12,5mm) .474" dia. - 1/8" x 13/16" or .790" | |
| Add P to any | Tire Print - GOODYEAR EAGLE or MICHELIN | ![]() |
| PA-1/32 | 1/32 INTERNATIONAL Aluminum Front Tires | |
|
Axle and Motor Oilites
|
||
|
BUE-3/32
|
3/32 Axle oilite bushing em bronze sinterizado |
![]() |
|
BUE-1/8
|
1/8 Axle oilite bushing em bronze sinterizado |
![]() |
|
BU-012
|
2mm x 5mm Flanged oilite bushing Box 16C |
![]() |
|
BUE-013New* |
2mm x 6mm Flanged oilite bushing 16D |
![]() |
|
Axles |
||
|
EI-3/32S New* |
3/32 premium Axle Solid 3/32" axle, highly durable 60HRc Very finely grinded and polished |
|
|
EI-3/32SS New* |
3/32 premium axle - Select Solid 3/32" axle, highly durable 60HRc Very finely grinded and polished Select one by one Maximum deflection of 0,001 mm
|
![]() |
|
EI-3/32SCH New* |
3/32 premium axle – Select / Flatted
|
![]() |
|
EI-3/32L |
3/32 Long Axles (110mm) |
|
|
EI – 1/8 |
1/8 Premium Axle |
|
|
|
|
|
|
Axle Spacers |
||
|
AEB-015 |
Phosphor Bronze or Steel 3/32 axle spacers 3/32 0.15/0.30/0.50mm 10/bag |
|
|
|
|
|
|
ABP – 100 |
3/32 axle spacers (Bulk) 100/bag |
|
|
CHASSIS |
||
|
INT-32 |
Euro
Toy 1/32 INTERNATIONAL Chassis |
![]() |
|
Parma 2005 |
MILLENIUM PARMA/G12 2004 16D and GROUP 12 GT and TURISM Brazilian’s Champion 2005 |
![]() |
|
TWP –1220 WIRE |
MILLENIUM WIRE (TWP WING)GROUP 12 / GROUP 20 WING Winner since 2000 in all Regional Championship |
![]() |
|
F1C-001 |
ESPECIAL F1 Chassis 1/24Laser Cut Nickel Plated |
![]() |
|
FISCH-G12 |
Steel EDM Professional Chassis for Group 12 - Fischler Design |
|
| FISCH-G27 | Steel
EDM Professional Chassis for Group 27 - Fischler Design Winner at Alpha's Classic 2005 Group 27 and Open |
|
|
Bodies & Aircontrol
|
||
|
|
|
|
|
1/32-INTT |
1/32 International clear - lexan |
|
|
1/32-INTP |
1/32 International painted - lexan |
|
|
1/24 – LEX T |
1/24 lexan .007” ou .010” clear |
|
|
1/24 – LEX P |
1/24 lexan .007” ou .010” painted |
|
|
LOC1 |
1/32 and 1/24 lexan .040” for rental cars clear |
|
|
LOC2 |
1/32 and 1/24 lexan .040” for rental cars painted |
|
|
AS – 04 |
Air kit .004 side dams x .005 spoiler
|
|
|
AS – 05 |
Same as above but with .005 side dams |
|
|
AS – 06 |
Same s above but with .006 spoiler |
|
|
As – 07 |
Pre-cut air kit .005 x.005 |
|
|
|
|
|
|
FAI-001 |
Lane stickers (10 / pck.) |
|
|
Gears and Pinions
|
||
|
CO – 001 |
64 pitch polymer axle gear – 36T,37T,38T and 39T
|
|
|
CO-002 |
64 pitch polymer axle gear – 36T,37T,38T and 39T25/bag |
|
|
PI - 001 |
64 pitch pinions – 8T, 9T,10T, 11T, 12T, and 13T (CAMEN) |
|
|
Guides and Acessories |
||
|
GUS- 001 |
Nylon Guide
|
![]() |
|
GUS- 002 |
Cut Down Nylon Guide
|
![]() |
|
POA- 001 New* |
Guide Nut |
![]() |
|
CT – 001 New* |
Heavy Braid # 408 Strands100 pairs/bag |
![]() |
|
BIG – 001 |
BRAID GEL |
|
|
BIG – 002 NEW |
BRAID JUICE |
![]() |
|
TER- 001 New* |
Guide Clips |
![]() |
|
TER- 002 New* |
Guide Clips25 pairs/bulk |
|
|
AGB-025 |
Phosphor Bronze Guide Spacer 0.15mm 10/bag |
|
|
AGB-025 |
Phosphor Bronze Guide Spacer 0.15mm 25/bag |
|
|
FIS-001 |
Silicone Lead Wire 1 feet |
![]() |
|
FIS-010 |
Silicone Lead Wire 10 feet |
|
|
FIS-100 |
Silicone Lead Wire 100 feet |
|
|
OIL |
||
|
|
|
|
|
OLR – 001 |
PIN POINT PRÖ OILER
|
![]() |
|
GLB-001 |
TIRE TRACTION |
![]() |
|
TIGER-001 |
TIRE CLEANER ( TIGER MILK) |
|
| FLUX-001 |
SOLDERING
FLUX
|
|
|
TAPE |
||
|
|
|
|
|
FT- 002 New* |
Strapping tape50m X 12mm Eurotape |
|
|
FT- 005 |
Clear tape 30m |
|
|
FT- 006 |
Double face tape 50m |
|
|
|
|
|
|
DECALS |
||
|
|
|
|
|
|
|
|
|
DE-001 |
BENETTON FÓRMULA ONE SCHUMACHER |
|
|
DE 002 |
BRABHAM FORMULA ONE NELSON PIQUET |
|
|
DE-003 |
COPERSUCAR FORMULA ONE EMERSON FITTIPALDI |
|
|
DE-004 |
FERRARI FORMULA ONE JEAN ALESI |
|
|
DE-005 |
JORDAN FORMULA ONE BENSON & HEDGES |
|
|
DE-006 |
JORDAN FORMULA ONE SASOL RUBENS BARRICHELLO |
|
|
DE-007 |
LIGIER GITANES FORMULA ONE |
|
|
DE-008 |
LOTUS FORMULA ONE JOHN PLAYER SPECIAL AYRTON SENNA |
|
|
DE-009 |
LOTUS FORMULA ONE JOHN PLAYER SPECIAL EMERSON FITTIPALDI |
|
|
DE-010 |
MC LAREN FORMULA ONE EMERSON FITTIPALDI |
|
|
DE-011 |
MC LAREN FORMULA ONE MARLBORO AYRTON SENNA |
|
|
DE-012 |
WILLIAMS FORMULA ONE CANON / HONDA NIGEL MANSELL |
|
|
DE-013 |
BRABHAM FORMULA ONE BT 44 B |
|
|
DE-014 |
BMW FINA WARSTEINER |
|
|
DE-015 |
FORD GT / FERRARI 330 P2/ FORD FIREBIRD |
|
|
DE-016 |
MC LAREN FINA WARSTEINER |
|
|
DE-017 |
MERCEDEZ CLK SPORTS WEAR |
|
|
DE-018 |
MERCEDEZ D 2 PRIVAT |
|
|
DE-019 |
NASCAR AC DELCO SUPERMAN |
|
|
DE-020 |
NASCAR MC DONALD S |
|
|
DE-021 |
NASCAR STAR WARS EPISODE II |
|
|
DE-022 |
PANOZ NESCAFÉ BLEND |
|
|
DE-023 |
PORSCHE ROTHMANS |
|
|
DE-024 |
VOLVO 850 |
|
|
DE-025 |
NASCAR SKOAL BANDIT |
|
|
DE-026 |
PORSCHE GTP WARSTEINER |
|
|
DE-027 |
81-LAS VEGAS VERSION BT 49C |
|
|
DE-028 |
FERRARI 312 T3 |
|
|
DE-029 |
ALFA ROMEO 155 V6 |
|
|
DE-030 |
MERCEDEZ CLK GTR |
|
|
DE-031 |
MC LAREN F1 GTR GULF |
|
|
DE-032 |
NUMEROS 1/32 |
|
|
DE-033 |
BUDY LIGHT FÓRMULA INDY |
|
|
DE-034 |
VALVOLINE FÓRMULA INDY |
|
|
FAI-001 |
Lane stickers (10 / pck.) |
|
|
|
|
|
CONTROLLERS and ACESSORIES |
||
|
ACEL-001 |
TWP
Pro Controller With 1.5 / 2.5 / 3.5 and 25 Ohm resistor |
|
| ACEL-002 | Pro
Controller Kit with Silicone Wire /less resistor |
|
| ACEL-003 | Single Resistor | |
| ACEL-004 | Clear Lexan Handle | |
| ACEL-005 | External Resistor 1R 1.5R 2R 3R | |
| ACEL-006 | Alligator Clips w/ Boots(white,black and red) | ![]() |
| ACEL-007 | Controller Spring fits Parma e TWP Controller | ![]() |
| ACEL-008 | Phosphor Bronze Switch Block Ceramic 9 points | ![]() |
| ACEL-009 | Contact
Parma Turbo Controller/TWP and Others |
![]() |
| ACEL-010 | Nylon Trigger (complete kit) | |
| ACEL-011 | Controller Aluminum Frame | |
| ACEL-012 | Controller Wire ( white, red and black) | |
| ACEL-013 | Contacts and Terminals | |
| ACEL-014 | Controllers Screws | |
| ACEL-015 | 14 Gauge Controller Wire (purple) 10 feet | ![]() |
| ACEL-020 | Aluminum Barrel Type Resistor Heat Sink | ![]() |
| GPE-001 | Eletronic Module | ![]() |
| GPE-002 | Circuit Board | |
| GPE-004 | Key on/off | |
| GPE-010 | Eletronic Controller without variable brake | |
| GPE-011 | Eletronic Controller with variable brake | ![]() |
|
TOOLS |
||
|
|
|
|
|
TOR-001 |
Tire Truer |
![]() |
|
|
|
|
|
FER-001 |
Diamond commutator cutting tool |
![]() |
|
CHA- 001 |
Allen wrench with guide nut tool |
![]() |
|
CHA- 002 |
Spare allen tip |
|
|
PRA- 001 |
Jig (in MDF) |
|
|
PRA-002 |
Phenolic Magnetic JigNeodimiun Mags |
![]() |
|
PRA-003 |
Phenolic Alignment JigFor chassis |
![]() |
|
GAP-004 |
Alignment bar with holes |
![]() |
|
DIS-001 |
Dremel cutting disc (20 units pk) |
|
|
DIS-001B |
Dremel cutting disc (100 k) |
|
|
SAC-001 NEW |
Gear Puller |
![]() |
|
ALN-001 NEW |
Rear Jig Wheelsuse to set axle height.591, .607, .622 |
![]() |
| GAB-001 | Tech Check UPAF/Brazil | ![]() |
| ROS_001 | Professional
Guide Threading Tool precision guide threading tool for threading guides or repairing old threads |
![]() |
|
Power Supplies |
||
|
POW- 1610 |
Power Supply 16V x 10A110V/220V regulável, digital com leitura em Volts/Amper |
|
|
POW-1203 |
Power Suplly Regulável 12V x 3A |
|
|
POW-1205 |
Power Supply Regulável 12V x 5 A com display digital |
|
| POW-EL01 |
Eletronic Power Supply 12V x 10A (110V x 220V)
|
|
|
Diamond Tools |
||
|
GAP- 001 |
Brush radius toolWITH 2 DIAMETERS
|
![]() |
|
GAP- 002 |
Diamond ID Grinding tool ř .468 < x < ř .570
|
![]() |
|
GAP- 003 NEW |
Diamond Alignment bar with holesWITH 2 HOLESfor vertical and horizontal brush hoods |
![]() |
|
Soldering Iron |
||
|
FER- 001 |
Soldering Iron 60W |
|
|
FER- 003 |
Sodering Flux |
|
|
FER- 004 |
Silver Solder 5% |
|
|
FER-005 |
60/40 Solder - Tube |
|
|
FER-006 |
60/40 Solder - 500 g |
|
|
|
|
|
|
Ready to Run Cars and Kits |
||
|
CAR32 KIT |
KIT EURO TOY 1/32 INTERNATIONAL |
|
|
CAR- 132 |
1/32 INTERNACIONAL MOTOR MABUCHI |
|
|
CAR- PAR |
Parma 1/24 Transversal #498 |
|
|
CAR-PAR2 |
Parma 1/24 Transversal #499 |
|
|
CAR- 012 |
Group 12 1/24 |
|
|
CAR- 012w |
Group 12 1/24 Wing |
|
|
CAR- 020 |
Group 20 1/24 Wing |
|
|
CAR-020P |
Group 20 PRO 1/24 Steel Chassis |
|
|
CAR- 027 |
Group 27 Single |
|
|
CAR- 007 |
Group 7 10 mags |
|
|
FORMULA 1 TWP 1/24
|
||
|
KTF-003 |
Complete without motor |
|
|
KTF-002 |
Complete with Parma motor 499 or Pro Slot FDX pitch 64 |
![]() |
|
|
||
|
RENTAL CAR and CONTROLLER |
||
|
CAR- 001 |
Scale 1/24Millenium Parma Chassis, Mabuchi motor, Gear and Pinion Pitch 64 + controller
|
|